Advanced
Online Catalog
>
Redline Oils, Lubricants & Additives
>
COOLANTS AND OTHERS
Coolants and Others
Ref: Coolants and Others
We have a wide range of coolant and other products available, please select one of the products below to view the full details and to buy online.
WaterWetter
Ref: WaterWetter
WaterWetter® is a unique wetting agent for cooling systems which reduces coolant temperatures by as much as 30ºF. This liquid product can be used to provide rust and corrosion protection in plain water for racing engines, which provides much better heat transfer properties than glycol-based antifreeze. Or it can be added to new or used antifreeze to improve the heat transfer of ethylene and propylene glycol systems. Designed for modern aluminum, cast iron, copper, brass and bronze systems. Compatible with all antifreezes, including the latest long-life variations.
Size 355ml bottle.
Price: £10.53
(Incl. VAT)
SuperCool with WaterWetter
Ref: SuperCool with Water
SuperCool with WaterWetter® (80205) is a pre-mixed coolant for motorcycles, ATVs, karts, generators, and other small water-cooled engines. This product doubles the wetting ability of water to improve heat transfer and reduce cylinder head temperature.
Compatible with all glycol antifreeze and coolants, this product is blended with deionized and purified water and WaterWetter®, the most effective heat transfer agent available with corrosion inhibitors to satisfy the same ASTM corrosion tests which glycol-based antifreezes are designed to pass (ASTM D2570 and ASTM D1384). Red Line's WaterWetter® provides excellent rust and corrosion protection for modern cast iron, aluminum, and brass systems. Use with a long-life antifreeze if freezing temperatures are to be encountered. This product does not contain anti-freeze and its freezing point is 32ºF or 0ºC.
Available in 1/2-Gallon containers.
Price: £21.10
(Incl. VAT)
Diesel WaterWetter
Ref: Diesel WaterWetter
Same improvements in cooling efficiency as Water Wetter®, but without the rust and corrosion inhibitors. Designed for heavy-duty diesel engines which use more than 33% antifreeze.
Cooling System Heat Transfer Agent for Use with Antifreeze / Water Solutions Improves the ability of coolant to wet heat transfer surfaces by 50%. This provides significantly better coolant contact in the cylinder head and can reduce coolant and cylinder head temperature by as much as 10-20°F. This product will not lower the temperature of the cooling system below the thermostat temperature and will be effective when the thermostat is wide open, such as heavy traffic of climbing long grades. This improvement in wetting helps reduce cavitation in liners and water pump.
Size 443ml
Price: £14.34
(Incl. VAT)
Assembly Lube
Ref: Assembly Lube
Designed to be used a lubricant to apply to potential wear surfaces before assembly in order to prevent metal contact upon startup before adequate lubrication is supplied.
Provides three times greater film strength than conventional black Molybdenum Disulfide greases and will not clog oil filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing the storage of parts for years. A thin film of protection is all that is required on mating parts. Red Line Assembly Lube will mix with our motor oil and can be used on all lubricated parts such as cams, followers, pistons, and bearings, and bolt threads. Use only a small amount on bearing and piston surfaces - too much can make it difficult to turn over the engine. Red Line Assembly Lube is an excellent corrosion inhibitor and can be used on machined surfaces to provide long-term corrosion protection. Do not use on exhaust bolts or other high temperature bolts which require an anti-seize.
Size 113g
Price: £9.41
(Incl. VAT)
CV2 Grease
Ref: CV2 Grease
Red Line CV-2 Grease is designed to withstand the extreme temperatures and pressures which occur in high-performance wheel bearings and CV-joints. The excellent high-temperature stability, extreme- pressure protection and water resistance, enables it to out-perform even the best conventional or synthetic greases. Red Line CV-2 Grease can be used in a wide range of applications at temperatures ranging between -100°F to 500°F and provides good oxidation and corrosion resistance, low evaporation and oil separation, and has a minimum effect on rubber seals.
Possesses a very high melting point, excellent water washout resistance and superior antiwear which makes it excellent for high temperatures and extreme loads. CV-2 contains an organic moly and is for wheel bearings, high angle and conventional CV joints, chassis lubrication and high temperature, high speed industrial equipment. The exceptional extreme- pressure performance and the fluidity of the synthetic oil allows increases in bearing life of 200% to 800%.
Red Line CV2 Grease will retain its consistency and extreme-pressure performance under high- temperature and high-shear conditions for extended periods, which extends the performance ranges of the lubricated components. Red Line CV-2 will darken after high-temperature use; this darkening will not detrimentally effect the performance of the grease. Although Red Line CV-2 is compatible with small amounts of many petroleum-based greases, it is always good lubrication practice to thoroughly clean out the old grease to eliminate abrasive particles and to minimize the possibility of grease incompatibility.
Size 397g
Price: £15.82
(Incl. VAT)
Power Steering Fluid
Ref: Power Steering Fluid
Provides much improved wear protection, resists thermal breakdown, evaporation and foaming at high temperatures. Also, provides continued high pump output. Suitable for most power steering units.
Size US Quart
Price: £12.22
(Incl. VAT)
Online Catalog
>
Redline Oils, Lubricants & Additives
>
COOLANTS AND OTHERS
